Implementing Cisco IP Routing (300-101)

Network Principal(Day1)

Identify Cisco Express Forwarding concepts

1. FIB

2. Adjacency table

Explain About general network challenges(Day2)

1. Unicast.33

2. Out-of-order packets

3. Asymmetric routing

About IP operations(Day3)

1. ICMP Unreachable and Redirects

2. IPv4 and IPv6 fragmentation

3. TTL

Explain About TCP operations(Day4)

1. IPv4 and IPv6 (P)MTU

2. MSS

3. Latency

4. Windowing

5. Bandwidth-delay product

6. Global synchronization

Recognize proposed changes to the network(Day5)

1. Changes to routing protocol parameters

2. Migrate parts of the network to IPv6

3. Routing protocol migration

Technologies(Day6)

Setup & check PPP

1. Authentication (PAP, CHAP)

2. PPPoE (client side only)

Explain About Frame Relay(Day7)

1. Operations

2. Point-to-point

3. Multipoint

Technologies(Day8)

Identify, configure, and check IPv4 address and subnetting

1. Address types (Unicast, broadcast, multicast, and VLSM)

2. ARP

3. DHCP relay and server

4. DHCP protocol operations

Identify IPv6 address and subnetting(Day9)

1. Unicast

2. EUI-64

3. ND, RS/RA

4. Autoconfig (SLAAC)

5. DHCP relay and server

6. DHCP protocol operations

Setup & check static routing(Day10)

Setup & check default routing

Evaluate routing protocol types

1. Distance vector

2. Link state

3. Path vector

About administrative distance(Day11)

To solve passive interfaces(Day12)

Setup & check VRF lite(Day13)

Setup & check filtering with any protocol(Day14)

Setup & check redistribution between any routing protocols or routing sources(Day15)

Setup & check manual and autosummarization with any routing protocol(Day16)

Setup & check policy-based routing(Day17)

Identify suboptimal routing(Day18)

Explain About ROUTE maps(Day19)

Setup & check loop prevention mechanisms(Day20)

1. Route tagging and filtering

2. Split-horizon

3. Route poisoning

Setup & check RIPv2(Day21)

About RIPng(Day22)

About EIGRP ROUTING packet types(Day23)

Setup & check EIGRP ROUTING neighbor relationship and authentication(Day24)

Setup & check EIGRP ROUTING stubs(Day25)

Setup & check EIGRP ROUTING load balancing(Day26)

1. Equal cost

2. Unequal cost

About and optimize EIGRP ROUTING metrics(Day27)

Setup & check EIGRP ROUTING for IPv6(Day28)

About OSPF ROUTING packet types(Day29)

Setup & check OSPF ROUTING neighbor relationship and authentication(Day30)

Setup & check network types, area types, and router types(Day31)

1. Point-to-point, multipoint, broadcast, nonbroadcast

2. LSA types, area type: backbone, normal, transit, stub, NSSA, totally stub

3. Internal router, backbone router, ABR, ASBR

4. Virtual link

Setup & check OSPF ROUTING path preference(Day32)

Setup & check OSPF ROUTING operations(Day33)

Setup & check OSPF ROUTING for IPv6(Day34)

About, configure, and check BGP peer relationships and authentication(Day35)

About IOS AAA using local database(Day36)

About device security using IOS AAA with TACACS+ and RADIUS(Day37)

1. AAA with TACACS+ and RADIUS

2. Local privilege authorization fallback

Setup & check device access control(Day38)

1. Lines (VTY, AUX, console)

2. Management plane protection

3. Password encryption

Setup & check router security features(Day39)

1. IPv4 access control lists (standard, extended, time-based)

2. IPv6 traffic filter

3. Unicast reverse path forwarding

Network Infrastructure Services(Day40)

Setup & check device management

1. Console and VTY

2. Telnet, HTTP, HTTPS, SSH, SCP

3. (T)FTP

Setup & check SNMP(Day41)

1. v2

2. v3

Setup & check logging(Day42)

1. Local logging, syslog, debugs, conditional debugs

2. Timestamps

Setup & check Network Time Protocol (NTP)(Day43)

1. NTP master, client, version 3, version 4

2. NTP authentication

Setup & check IPv4 and IPv6 DHCP(Day44)

1. DHCP client, IOS DHCP server, DHCP relay

2. DHCP options (About)

Setup and check IPv4 Network Address Translation (NAT)(Day45)

1. Static NAT, dynamic NAT, PAT

About IPv6 NAT(Day46)

1. NAT64

2. NPTv6

About SLA architecture(Day47)

Setup & check IP SLA

1. ICMP

Setup & check tracking objects(Day48)

1. Tracking objects

2. Tracking different entities (for example, interfaces, IPSLA results)

Setup & check Cisco NetFlow(Day49)

1. NetFlow v5, v9

2. Local retrieval

3. Export (configuration only)