VLSI Data Conversion Circuits free videos and free material uploaded by Indian Institute of Technology, chennai (IIT chennai). This session contains about VLSI Data Conversion Circuits Updated syllabus , Lecture notes , videos , MCQ , Privious Question papers and Toppers Training Provided Training of this course. If Material not uploaded check another subject
Mod-01 Lec-01 Introduction to Data Conversion.
Mod-01 Lec-02 Sampling-1.
Mod-01 Lec-03 Sampling-2.
Mod-01 Lec-04 Nonidealities in Samples.
Mod-01 Lec-05 Noise due to Sampling.
Mod-01 Lec-06 Distortion in a Sampling Switch.
Mod-01 Lec-07 Gate Boosted Switches-1.
Mod-01 Lec-08 Gate Boosted Switches-2.
Mod-01 Lec-09 Charge Injection.
Mod-01 Lec-10 S/H Characterization - 1.
Mod-01 Lec-11 S/H Characterization - 2.
Mod-01 Lec-12 FFTs and Leakage.
Mod-01 Lec-13 Spectral Windows - 1.
Mod-01 Lec-14 Spectral Windows-2.
Mod-01 Lec-15 ADC/DAC Definitions.
Mod-01 Lec-16 Quantization Noise - I.
Mod-01 Lec-17 Quantization Noise -2.
Mod-01 Lec-18 Oversampling & Noise Shaping.
Mod-01 Lec-19 Delta-Sigma Modulation - 1.
Mod-01 Lec-20 Delta-Sigma Modulation - 2.
Mod-01 Lec-21 Linearized Analysis.
Mod-01 Lec-22 Stability of Delta Sigma Modulators.
Mod-01 Lec-23 High Order DSMs.
NTF Design and Tradeoffs.
Mod-01 Lec-25 Single bit Modulators.
Loop Filter Architectures.
Mod-01 Lec-27 Continous-time Delta Sigma Modulation.
Mod-01 Lec-28 Implicit Antialiasing.
Mod-01 Lec-29 Modulators with NRZ and Impulsive DACs.
Mod-01 Lec-30 High Order CTDSMs.
Mod-01 Lec-31 CTDM Design.
Mod-01 Lec-32 Excess Loop Delay (ELD).
Mod-01 Lec-33 ELD Compensation.
Mod-01 Lec-34 Effect of Clock Jitter on CTDSMs - 1.
Mod-01 Lec-35 Effect of Clock Jitter on CTDSMs - 2.
Mod-01 Lec-36 Dynamic Range Scaling.
Mod-01 Lec-37 Simulation of CTDSMs.
Mod-01 Lec-38 Integrator Design-1.
Mod-01 Lec-39 Integrator Design-2.
Mod-01 Lec-40 Flash ADC Design.
Mod-01 Lec-41 Latches and Metastability.
Mod-01 Lec-42 Offset in a Latch-1.
Mod-01 Lec-43 Offset in a Latch-2 Auto Zeroing.
Mod-01 Lec-44 Auto Zeroing-2.
Mod-01 Lec-45 Auto Zeroing-3.
Mod-01 Lec-46 Autozeroing in Flash ADCs.
Mod-01 Lec-47 Flash ADC Case Study.
Mod-01 Lec-48 Flash ADC Case Study.
Mod-01 Lec-49 Flash ADC in a Delta Sigma Loop.
Mod-01 Lec-50 DAC Basics.
Mod-01 Lec-51 Binary and Thermometer DACs.
Mod-01 Lec-52 Segmented DACs.
Mod-01 Lec-53 Optimal DAC Segmentation.
Mod-01 Lec-54 DAC Nonlinearities.
Mod-01 Lec-55 Current Steering DACs-1.
Mod-01 Lec-56 Current Steering DACs-2.
Mod-01 Lec-57 DAC Mismatches in DSMs.
Mod-01 Lec-58 Calibration and Randomization.
Mod-01 Lec-59 Dynamic Element Matching-1.Mod-01 Lec-60 Dynamic Element Matching-2.
Instructor: Prof. Shanthi Pavan, Department of Electrical Engineering, IIT Madras.
This course covers the analysis and design of CMOS Analog-to-Digital and Digital-to-Analog Converters, with about 7 design assignments. Topics covered in this course include basics of A/D and D/A conversion (sampling, quantization, quantization noise, aliasing and reconstruction filtering), ADC/DAC metrics (differential and integral nonlinearity, SNR, SNDR, SFDR and dynamic range), ADC architectures (flash ADCs, oversampling converters, successive approximation converters), and DAC design (current steering DACs).
- 0 Reviews
- 5 Students
- 330 Courses
Write a public review